PRODUCT
PN16 resilient seated wedge gate valve with cap top
Size： DN40-1000
Design Standard : DIN3202-F5
Pressure : PN10/16
Flange End : PN10/16
Face To Face : DIN3202 F5
Tightness Test : ISO5208, API598, EN12266-1
Material:
|
No. |
Part Name |
Material |
|
1 |
Body |
GGG50 | A536 | A395 |
|
2 |
Top Cap |
GGG50 | A536 | A395 |
|
3 |
Disc |
GGG50 | A536 | A395 +NBR | EPDM |
|
4 |
Stem |
SS420 | SS416 |
|
6 |
Operated |
Hand Lever | Worm Gear | Pneumatic | Electrical |
Specifications:
|
Nominal pressue (MPa) |
1.0 |
1.6 |
|
|
Nominal diameter(mm) |
50-1000 |
50-1000 |
|
|
Test pressure |
Shell |
1.5 |
2.4 |
|
(MPa) |
Seal |
1.1 |
1.76 |
|
Applicable temperature |
120°C |
||
|
Applicable medium |
water, Sewage, Sea water |
||
|
Operating mode |
manual, worm gear, pneumatic, electric, etc. |
||
Product Profile:
DIN F5 Resilient seated gate valve soft seal introduced foreign advanced technology produced by DIN standard gate valve overcome the general gate valve sealing inspection, elastic fatigue, easy to rust and other defects. Soft seal gate valve has the characteristics of light on/off, reliable sealing, good elastic memory and long service life. Can be widely used in tap was
sewage, construction, food, power, and other fluid pipeline as a closure device.
Product Overiew:
1. The gasket of the vulnerable parts, the sealing material is EPDM rubber, which is reliable and has a long lie.
2. The whole gate is covered with adhesive, is good covering performance and accurate geometry size,to ensure reliable sealing .
3. The valve body bonnet is made of ductile iron material, light weight and easy installation.
4 The bottom adopts the same flat-bottom valve seat design as the water pipe, which does not produce debris deposition and is reliably sealed.
5 The inner and outer cavity is made of non-toxic epoxy resin to prevent /corrosion and rust. which can not only be used for drinking, but also for sewage system.
